Sumsub Pricing in 2026: What It Actually Costs

"Sumsub pricing" resolves the same way for most people who search it: two real numbers, followed by a wall of "Enterprise, let's talk." That's not unusual for this category, most identity verification vendors price the same way, but it means a team comparing Sumsub cost against alternatives is comparing a published rate card against an unpublished one for everything past the entry tiers.

This post lays out exactly what Sumsub's own pricing page publishes, what it doesn't, and what a team ends up paying at a representative volume, sourced from Sumsub's pricing page directly rather than a reseller's summary of it.

What Sumsub Pricing Actually Publishes

Two of Sumsub's three tiers carry a real number. The third doesn't.

Where Sumsub Pricing Plans Stop Being Public

The split between what's priced and what's quote-only lands on a specific line, and it's worth seeing side by side.

KYB in particular has no self-serve price anywhere on Sumsub's site. A team that needs business verification alongside individual KYC is routed to a sales conversation regardless of volume, even if every other check it runs fits comfortably inside Basic or Compliance.

Reading the Fine Print on Sumsub Cost

Both published tiers come with a 14-day free trial covering 50 checks. Past that, the billing rule is stated plainly on the pricing page: "the minimum amount that you pay each month. Once you exceed this amount, you will be charged for all additional checks," prorated on both Basic and Compliance, with charges applying only to successful verifications.

Sumsub ID, the free reuse feature included even on Basic, is worth a second look before treating it as a cost saver. It only helps when the other company checking your user is also a Sumsub customer, it's a distribution advantage tied to Sumsub's client list, not an open credential standard a user can carry to any verifier. Hypersign's Sumsub comparison covers this distinction in more depth.

A commonly cited figure puts Sumsub's AML screening add-on at $1.36 per check on top of the Compliance tier, but that number doesn't appear on Sumsub's current public pricing page text. Treat it as unconfirmed and check directly with Sumsub sales before budgeting against it, rather than as a freshly verified rate.

Sumsub Pricing at 1,200 Verifications a Month

Published per-verification rates and monthly minimums turn into a real monthly bill once volume is applied. Here's what Sumsub's two public tiers cost at 1,200 verifications a month, against Hypersign's own published rate at the same volume.

Sumsub figures per sumsub.com/pricing; Hypersign figure per Hypersign's pricing page. Both are published per-verification rates multiplied by volume, not a quote.

Basic is competitive against Hypersign's rate for document and liveness checks alone. Once AML screening is required, moving to Compliance adds both a higher per-check rate and a higher minimum, and the gap to Hypersign's flat rate widens at the same volume.

Where Hypersign's Pricing Model Differs

Hypersign's steady-state rate is $0.75 per verification with no monthly minimum, in effect from month 13 onward. Year one runs $500 per quarter ($2,000 total across four payments), with 100 checks included per quarter. That rate bundles document and biometric verification with a purpose-bound Consent API (timestamped, audit-ready, built for GDPR Article 7 and India's DPDP Act) and an encrypted credential vault, neither of which is a line item on Sumsub's pricing page. Reusable credentials issue on the open W3C Verifiable Credentials standard rather than a client-network-locked reuse feature.

KYB is priced separately at $20 per business, self-serve, with no Enterprise gate. AML screening, to be clear about where Hypersign doesn't publish a number either, is an add-on priced through a sales conversation, same as it is on Sumsub past the Basic tier. Neither vendor has a fully public rate for that specific check.

The full Sumsub vs Hypersign pricing and feature breakdown, including where Sumsub's crypto and Travel Rule depth is a real advantage worth weighing, is mapped feature by feature on the Hypersign vs Sumsub comparison page.

Which Pricing Model Actually Fits

Sumsub's Basic tier is a reasonable starting point if document and liveness checks are the whole requirement and AML, KYB, and fraud correlation aren't yet in scope. Its strengths outside pricing are real: coverage across 220-plus countries and 14,000-plus document types, a Gartner Magic Quadrant Leader standing for identity verification, and a dedicated FATF Travel Rule suite that's genuinely hard to match for crypto exchanges and VASPs already deep in that ecosystem.

• Crypto or VASP compliance is the primary use case? Sumsub's Travel Rule tooling and exchange-network depth are a real edge worth the Compliance or Enterprise tier.
• Need KYB, consent management, and reusable credentials self-serve, without an Enterprise sales cycle? That's the specific gap Hypersign's flat-rate model is built to close.
• Need AML screening specifically? Confirm the current add-on rate directly with either vendor's sales team; neither publishes it as a flat, self-serve number.

FAQ

How much does Sumsub cost per verification?

Sumsub's Basic plan runs $1.35 per verification with a $149/month minimum. The Compliance plan, which adds AML screening and ongoing monitoring, runs $1.85 per verification with a $299/month minimum. Both figures come directly from Sumsub's own pricing page.

Is Sumsub's pricing public?

Partially. Sumsub publishes rates for Basic and Compliance, its two self-serve tiers. Everything past that, KYB, non-document verification, Fraud Detection & Prevention, full ongoing monitoring, and Travel Rule tooling, sits behind a custom Enterprise quote with no published number.

What isn't included in Sumsub's published pricing plans?

Business verification (KYB), non-document verification, database validation, cross-customer Fraud Detection & Prevention, and FATF Travel Rule tooling are all gated behind the unpriced Enterprise tier. None of them appear as a self-serve line item on Basic or Compliance.

How does Sumsub vs Hypersign pricing compare?

At 1,200 verifications a month, Sumsub's Basic tier runs roughly $1,620 and Compliance runs roughly $2,220, against Hypersign's flat $900 at the same volume, with consent management and a credential vault bundled into that rate rather than priced separately. The full feature-by-feature comparison is on the Hypersign vs Sumsub page.

References

• Sumsub Pricing & Plans (sumsub.com)
  Source for all Basic, Compliance, and Enterprise tier figures, free trial terms, and billing language cited in this post.
• Hypersign Pricing
  Source for Hypersign's $0.75/verification rate, Starter plan terms, and KYB pricing.
• Hypersign vs Sumsub
  Full feature-by-feature comparison, including consent, audit trail, and reusable-credential differences.

Vendor pricing changes. Figures in this post reflect Sumsub's publicly stated rates as of this post's publication date, not a vendor endorsement or legal or financial advice. Confirm current pricing directly with Sumsub before making a purchasing decision.

About Hypersign

Hypersign is a KYC and identity verification platform priced at a flat $0.75 per verification with no monthly minimum after the first year, bundling document and biometric checks with consent management and a reusable credential vault into that single rate rather than gating them behind an Enterprise tier. It doesn't try to out-build Sumsub's crypto exchange network or Travel Rule suite, and says so plainly, it's built for teams that need KYB, consent, and reuse available self-serve from day one. See the full Hypersign vs Sumsub comparison for the complete picture.